jaz WIZARD 10, Manual

Page: 4 / 24

4
UK
INSTRUCTION MANUAL
1. ON/OFF button
2. Play/Pause + Answer/Resume
3. Previous track + Volume up
4. Next track + Volume down
5. USB flash drive socket
6. Charging socket
7. TF card slot
8. AUX connector
Recharge the speaker: insert the cable provided into the socket
(6) and the red LED will light up. When fully charged, the LED will
turn off.
Turning on the speaker: press the button (1) for a few seconds,
then hold down for two seconds to select Bluetooth® or AUX mode.
Pairing Bluetooth®: to pair the speaker with a Bluetooth device,
hold down the ON/OFF button (1) for about two seconds; a voice
message will confirm Bluetooth® activation and the LED will
quickly flash blue at the same time. The speaker will now be visible
as ‘JAZ WIZARD 10’ on your smartphone: if prompted, enter the
password 0000. Once the connection has been made, the blue LED
will stay on. The blue LED will flash slowly during playback.
Mode
Bluetooth
AUX IN
• Short press to
play/pause;
• Long press to
cancel or set up
the TWS function
• Double click to
redial last number,
short click to
pause/play; when
a call comes in,
short click to
answer/ hang up,
long click to reject
call.
Long press
to turn on or
short press
to change
the listening
mode
Premi
rapidamente
per il brano
precedente,
premi a
lungo per
abbassare
il volume
Premi
rapidamente
per il brano
successivo,
premi a
lungo per
alzare
il volume
Short press
to play/pause.
Short press
to change
the mode
Press and
hold to lower
the volume
Press and
hold to turn
up the volume