Jaz audio Twin TWS Free, User Manual

Page: 5 / 36

5
Right earphone (R) Left earphone (L)
Rejecting a call
Siri function
Previous
/next track
Shutdown
Play/Pause
Answer
/end call
When paired with the mobile phone, press the MFB button
on the earphones for about 4 seconds
Insert the headphones in the charging case and close the
cover: the headphones will switch off automatically
Double press the MFB button in audio mode
Double press the MFB button on the earphone
Press the MFB button for approximately 2 seconds
Press the R multifunction
button for around 2 seconds Press the L multifunction
button for around 2 seconds
Meaning of the LED colours:
Charging: solid red
In pairing mode: green and red flashing alternately
Connected: the green LED flashes approximately every 5 seconds
Not connected: the green LED flashes approximately every 2 seconds
Low battery: the red LED flashes
NOTE: The right earpiece is the master and when using the
earphones during calls, it is the only one that works (in compliance
with road safety regulations).
When activated, the two earphones will automatically connect to
each other first, then the right one will automatically connect to the
phone if it is paired first
Resetting the product
To restore the earphones to factory settings, press the MFB 3 times
while charging until the red and green LEDs flash together, then
release the button.
MFB function summary - multifunction key: