Jays d-Jays, User Manual

Page: 5 / 96

EN
1. iNtRodUCtioN
Thank you for choosing d-JAYS earphones. We strongly recommend that
you read this manual carefully before use. You can order accessories and
get information about service and support at our website: www.jays.se.
d-JAYS earphones are equipped with the JAYS Sound Isolation System
which eliminates up to 90% of ambient noise. This helps create a
silent environment which enhances the listening experience. With their
patented micro armature, d-JAYS earphones generate a sound quality
that has until now only been available to rock stars. The micro armature
helps you get the very best performance out of your portable device.
When you have used d-JAYS a few times you will notice the difference
between d-JAYS and other earphones.
2. PReCAUtioNS
» Do not use the product in other ways than are described in this
manual.
» Handle with care at all times and protect from external damage.
» Do not expose to heat, magnetism or cold, damp environments.
» To clean: use a mild, antiseptic detergent.
» Do not expose the cords and plugs to abnormal wear and tear, e.g.
by bending or pulling them.
» Avoid winding the cord too tightly.
» Avoid dropping or strong impact. Always leave the sleeve on for
shock protection.
3. PRoPeR USe
The d-JAYS earphone model is suitable for many different areas of
use. It is particularly suited to environments where you are likely to
be disturbed by ambient noise, e.g. at airplanes, on trains, on the
underground, at the gym or when you are studying. In short, whenever
you want nothing to come between you and the full enjoyment of your
music.
Inserting and removing the earphones
We recommend that you take the time to get accustomed to your
d-JAYS earphones to really experience the difference in sound quality
and comfort. For the best sound isolation, bass frequency response and
sound quality to be achieved, the earphones must be inserted correctly.
When you have used them for a while you will see how simple they are
to insert and remove.
» Turn the volume to minimum before insertion.