ELITE Series Adjustable Portable Backstop Instructions
- 3 of 27-
JSL-Inst039
www.jayprosports.com
3
Introduction
This guide describes the installation and use of the ELITE Series Adjustable
Portable Backstops, models PBEL54, PBEL66, and PBEL96.
The sections of this guide that detail the initial setup of the backstops is
written with experienced mechanical contractors/installers in mind. If you
require additional information or support to install your backstops, please
contact the Jaypro Sports customer support team, Monday through
Friday, 8:30AM to 5:00 PM (EST), at 1-800-243-0533.
The guide is organized in the order of operations required for initial
assembly, installation, and setup. The installer is responsible to carry out
the procedures described in sections 1 through 10. Section 11 describes
the procedure for raising and lowering the backstop and is intended to
be used by the end-user. Section 12 describes the procedure for
adjusting the lift-assist springs and should only be used by an experienced
contractor/installer. Please contact the Jaypro Sports customer support
team, Monday through Friday, 8:30AM to 5:00 PM (EST), at 1-800-243-0533
if assistance with locating an experienced professional is required.
4
Required Tools
Before continuing, please verify that you have the following tools required
to complete the installation and setup of your Elite series adjustable
portable backstop.
Ratcheting socket wrench with 24mm deep socket (supplied)
Ratcheting socket wrench with 7/8” deep socket
Hex wrench (5/64”)
Adjustable wrench
#2 Phillips screwdriver
Level
7/8” Transfer punch (recommended)
1-1/8” hole saw
1-3/8” hole saw
Adhesive suitable for metal-to-wood bonding
Sandpaper, 180 – 320 grit
