-
Page
5
of
15
IMPORTANT NOTICE:
1.
Soccer goals must be securely anchored at all times.
2.
Before each use, check to make sure all Safety/Warning labels are present and
legible (see label drawing). If any are missing, contact your dealer or Jaypro
Sports for replacement Safety / Warning labels.
3.
Before each use, thoroughly inspect each goal to ensure it is properly anchored,
and all hardware is secured. Inspect all components for structure integrity.
Replace any damaged or missing part or fasteners before using. Contact your
dealer or Jaypro Sports, for repair or replacement parts.
4.
NEVER climb on, or allow anyone to climb on the frame or net.
5.
When moving soccer goals, use adequate manpower (no less than two people) and
use extreme care to ensure the corners of the goal are not overstressed. Do not
tug on the backstays when attempting to move goals from side to side,
6.
Always remove nets when goals are not in use.
7.
Properly store goals when not in use or during the off-season, by disassembling,
laying the goal on its face, placing goals face to face, or placing goal face first
against a wall or fence.
8.
Use of this equipment other than intended, may be hazardous.
9.
Alteration or modification of this equipment may be hazardous and result in
injury.
*** ASSEMBLY INSTRUCTIONS REQUIRES 3 PEOPLE ***
TOOLS REQUIRED:
(1)
9/16” Socket Wrench and Box Wrench
(1)
7/32” Allen Wrench
(1)
Rubber Mallet
(1)
Step Ladder
Front Goal Face Assembly:
1.
Insert 4” crossbar x 280” long (6) into both left & right soccer uprights (1 & 2).
2.
Install hardware loosely, as shown.
3.
Insert 2” x 4” x 80” bases (7) into both left & right uprights (1 & 2).
4.
Install hardware loosely, as shown.
5.
Align parts and tighten hardware.
