-
Page
11
of
15
Net Attachment:
1.
Lay out the net inside the goal and identify one of the front top corners.
2.
Attach the net using the “Easy Clip” net attachment system. Use a ladder to
attach the net to the top crossbar.
3.
Loosely attach the rear cord, woven through the net, to the eyebolts in each rear
corner posts. This will make it easier to finish attaching the remainder of the net
to the goal.
4.
IMPORTANT. The black cord should be loosely woven through the top edge of
the net – roughly thru every ten squares. This will allow the net to slide side-to-
side when the cord is tensioned. If the cord is more tightly woven, starting at one
end, remove the cord and re-lace it.
5.
Securely tie-off one end of the cord to one of the eyebolts. Take the other end of
the cord and feed it thru the rope ratchet - following the direction of the arrow on
the ratchet.
6.
Hook the ratchet to the other corner pole and draw the cord up tight. This will
help define the top edge of the net, as the poles themselves will help provide
tension on the cord. The excess cord can be trimmed or tied off.
7.
Attach one of the bungee cords to each corner of the net as shown.
Dead End of Black Cord
Ratchet End
