Cleaning Outside Surfaces:
Clean only when cold to avoid the risk of burning.
Clean exposed surfaces using a soft cloth or sponge and a dilute solution of warm water and a mild soap or
dishwashing liquid. Under no circumstances should any alcohol-based cleaners be used as you risk damag-
ing the painted surfaces.
Flue Cleaning:
It will be necessary from time to time to have your flue pipe swept to remove the creosote and carbon build
up that occurs over time.
We recommend that the flue sweeping be done by a professional chimney sweep as it involves climbing
onto the roof.
Because of the unique double baffle design it is essential that the following instructions are followed and in
the order given.
Ensure you have a 130mm (5”) flue brush.
Fully open the firebox door.
Remove side and rear firebricks (3).
Remove triangular rear air diffuser by removing pins on the right side, slide the air diffuser to the right,
lower the left side and remove completely.
Remove 2-piece firebrick baffle plate.
Remove triangular forward air diffuser (see note 4 above).
Remove upper stainless steel baffle by removing pins and lowering; close firebox door.
Remove cowl and sweep the flue from the top, using 130mm flue brush and rods.
Remove Creosote deposit from the firebox.
Reassemble baffle system by reversing the procedure from instruction 8 back to 2.
We are sure you will get many years of great service from your new Jayline Starfire, and we thank you again
for choosing Jayline.
Best Regards
The Team at Jayline
