NOVEMBER 2012
page 3
www.jayline.co.nz
• Flue exiting more than 3 metres from the ridgeline must terminate no less than 1 metre above the
roof penetration (see diagram 1 below).
• Where the top of the flue pipe is more than 2 metres above its highest fixing point, it must be stayed
against high winds.
9. Drill and fix flue system into flue spigot with stainless steel self-tapping screws.
10. Drill and secure the appliance to the floor protector using the two holes in the rear legs of the
appliance.
FITTING SEISMIC RESTRAINT
The Floor Protector must be mechanically fixed to the floor by bolting or screwing.
Note:
Floor Protector
to be fixed by gluing when on a concrete floor that may have water pipes or electrical wires present. The
appliance can then be bolted to the floor protector with two 6mm x 50mm dynabolts.
BAFFlE
Before lighting your appliance for the first time, make sure the baffle is in the correct position being as
far to the rear as possible.
