21
WARNING:
When the slideout motor brake is released the slideout will not
lock into place, and therefore it will not be sealed from the outdoors! When the
slideout has been retracted, be sure to install the travel bars and the tie down
strap (if applicable) and return the break release lever to its downward
position in order to seal and lock the slideout.
WARNING: For models with a slideout front facing dinette seat, confirm that
the tie down strap is installed correctly prior to travel.
Preventative Maintenance
Your Power Gear slideout system has been designed to require very little maintenance.
To ensure a long life of your slideout system, read and follow these simple procedures.
CAUTION:
Do not work on your system unless the battery is disconnected.
• When the room is out, visually inspect the inner slide rail assemblies (see Fig. 3-1).
Check for excess buildup of dirt or other foreign material; remove any debris that may
be present.
• If the system squeaks or makes any noises apply a coat of light weight oil to the drive
shaft and roller areas. Remove any excess oil to prevent buildup of dirt and debris.
• If you have any problems or questions consult your local Jayco dealer or call Power Gear
1-800-334-4712
Summary of Contents for Mini Motorhome
