Section 6: Electrical System
88
9.
Press “SAVE” (Fig
6-A
).
10. Press “HOME” button.
When the keypad appears on the screen, enter the new 4-digit PIN (
Fig 7
).
Operating the handheld remote
1.
The menu screen will show sets of (4) functions (
Fig 8
). Select a function or press
“NEXT” for more options
(Fig 8-A
).
2.
To return to the previous menu screen press “PREV” (
Fig 9-A
).
3.
The awning light can be turned ON and OFF by pressing “LIGHT” in the menu (
Fig
10-A
).
4.
Press a component button in the menu (
Fig 10
) to enter the function operation screen
(
Fig 11
). To return to the previous screen press the “HOME” button.
Important remote control operating information
Never
attempt to operate a slide-out, awning, stabilizer jack, landing gear, etc
from the handheld remote and a corresponding switch (at the command center)
at the same time. Doing so can blow one or more fuses on the multi-function
receiver.
Immediately after operation of motor-reversing components using the handheld
remote, there is an 8 to 10 second delay where all redundant switches for motor-
reversing components are non-functional.
The “Light” button on the handheld remote will only control the awning light.
This circuit does
not
have “soft start” functionality; if turned “ON” with the re-
mote, it must be turned “OFF” with the remote. Likewise, if turned on at the
command center panel, it must be turned OFF with the same switch. The handheld
Summary of Contents for JAY FEATHER Towables 2020
