Jayco GRANITE RIDGE, Owner'S Manual

Page: 101 / 134

Range & Slide-in Cooktop
1. To remove the range top:
a. Remove the hold down clip by sliding it forward from the front
burner. (Fig.6-1A)
b. Lift the top upward by the front edge. The top will “snap”
loose from the clips mounted in the burner box.
2. To replace the range top:
a. Lower the range top into place while centering the three holes
in the top around the burners.
b. The top must be centered around all three burners.
c. Apply downward pressure on both sides to “snap” the top into
place and secure the range top.
d. Slide the hold down clip under front burner. (Fig. 6-1A)
3. To remove burner grates:
a. RV and CV Models - simply lift grate up and remove. Replace
by placing two legs at a time into the retaining grommets.
b. RA and CA model
• Grasp one side of the grate (left or right-hand side) and pull
straight up until grate “snaps” out of its retaining groove.
• To replace, place one side of the grate in the burner well,
ensure that the clip engages the emboss in the side.
• Gently press other end of the grate downward to “snap” the
grate into place. (Fig. 6-2)
Clean all surfaces quickly after boil overs or spillovers. Use a dry towel or cloth to soakup spills.
ALL SURFACES - When surface is cool, clean with warm soapy water, rinse and dry with soft
cloth. Additional cleaning measures:
• Control Knobs - pull the knobs straight off the stems and clean.
• Control Panel - You may use a spray glass cleaner, applying cleaner to a paper towel (do
not spray directly on panel).
• CookTop Surface - You may use a mild liquid cleaner /glass cleaner.
• Surface Burner Grates - They should be cleaned as soon as they become dirty. You may
need to use a non-abrasive plastic scrubbing pad.
• Surface Burners, Burner Ports or Orifices - if clogged, gently brush perforated areas with
a lightweight brush (toothbrush) or carefully clean holes out with a toothpick.
NOTE: Heavy burned on soil may require repeated cleaning steps until the soil is
completely removed.
NOTE: The grate and surface of the cooktop is covered with porcelain coating.
Porcelain is a glass/ceramic coating glazed to the surface of the metal. Porcelain
is designed to provide a surface that can withstand high temperatures and
maintain an attractive appearance and make it easier to clean.
RANGE AND OVEN STORAGE
Dry all surfaces and burner box, then spray surfaces with an oil base substance to preserve the
surface from rusting during long term storage. Wipe off oil coating before reuse.
Care and Maintenance 93
A
Fig. 6-1
Fig. 6-2