Jayco 2013 JAY FEATHER TOWABLES, Owner'S Manual

Page: 61 / 134

JAYCO TOWABLE SECTION 4 - TOWING & SET-UP
JFSTT/ JFXTT 4-15
Always have the safety chains attached when towing. Install them as shown below
so they do not restrict sharp turns, but tight enough so they do not drag on the
ground.
Fig. 4.6 Safety chain
installation
Crisscross the left safety chain under the coupler and attach to the right mounting
slot in the trailer hitch; repeat with the right safety chain. Slack for each length
should be the same but not more than necessary to permit the vehicle to turn at its
minimum radius.
T
OWING
B
EHIND
Y
OUR
RV – T
RAVEL
T
RAILERS
DO NOT tow anything behind your RV. The RV frame and bumper are not
designed for towing.
T
RAVEL
T
RAILER
S
ET
U
P
1. Position the RV as desired.
2. Level the RV (side-to-side).
3. Block the wheels securely to prevent the RV from moving.
4. Unhook the wire harness/connector plug, safety chains and breakaway switch
lanyard.
5. Install the dolly wheel or platform.
6. Release the weight distributing bars (customer supplied).
WARNING
Towing items behind your Jayco trailer, or overloading the rear, will void the
warranty and may result in: damage to the trailer or add-on items, towing
difficulties, property damage and/or personal injury.