Jayco 2008 Octane ZX, Owner'S Manual

Page: 67 / 104

and/or introduce dangerous excessive gas
pressure into the lines. In addition, an
overfilled container placed in hot sunlight may
expel excessive gas through the relief valve
and be susceptible to ignition by any nearby
open flame or spark.
If you do overfill the propane container, contact
your dealer or a qualified propane technician
for assistance immediately. Do not attempt to
service a propane container overfill yourself.
Maintenance
Propane gas is normally non-corrosive - you
need not worry about the inside of your
container. However, the outside should be
kept free from rust by a periodic coat of paint in
a light reflective color. Rust, scratches and/or
dents can affect the safety of the cylinder.
Inspect the cylinder at regular intervals. If there
is a problem, have it evaluated by a qualified
technician and discard it. DOT requires that a
visual inspection be made prior to each filling.
Any cylinder that has been exposed to fire,
leaks or seems damaged should not be
refilled.
Do not attempt to repair any
containers, container valves, regulator or
appliances by yourself. Use only trained
certified propane gas service technicians to
perform repairs.
Propane cylinder recertification
If you have an older RV you should know that,
according to Federal law, DOT cylinders may
only be used
for 12 years after their
manufacture date (the number of years for
certification may vary in your area). After that,
the cylinders must be “recertified” which
provides another five years of use. The
cylinders can be recertified every five years
thereafter.
Federal DOT (Department of
Transportation) regulations require periodic
inspections
and re-qualifications of the
propane cylinders. DO NOT USE damaged or
rusted containers.
Verify with your local propane dealer that all
required inspections and certifications have
been completed on the propane cylinder within
the correct time period before refilling the
cylinder.
P
ROPANE
R
EGULATOR
Have the LP system checked for leakage each
time a cylinder is refilled or after any part of the
propane system has been disconnected.
Two stage regulator
The two-stage regulator has the only moving
components in the propane system. Its sole
function is to reduce the pressure from the
propane containers to a safe and consistent
low
operating pressure. The first stage
reduces the container pressure to 10-13 lbs.
The second stage reduces the 10-13 lbs. of
pressure further to an operating pressure of
11” W.C. (water column) or 6.35 oz. of outlet
pressure to your appliances.
The second stage is adjustable and will need
to be adjusted by your dealer or qualified
propane
service technician for optimum
performance (this adjustment should always
be
made with a properly calibrated
manometer). If the pressure is too high, it
affects performance and safety; if the pressure
is too low, your appliances will not operate
correctly.
If your RV is equipped with the “automatic”
two-stage regulator, with both cylinders full of
propane, turn the lever on the regulator
towards the cylinder you wish to use first. This
will now be the “supply” cylinder and the other
the “reserve.”
Slowly open both cylinder
valves. The indicator on top of the regulator
63
SECTION 9
PROPANE SYSTEM
WARNING
Propane regulators must always be
installed with the regulator vent facing
downward. Regulators that are not located
in baggage compartments have been
equipped with a protective cover. Make
sure the regulator vent faces downward
and (if applicable) the cover is in place to
minimize vent blockage that could result in
excessive gas pressure causing fire or
explosion.