Australia
New Zealand
www.jaycar.com.au
www.jaycar.co.nz
1800 022 888
0800 452 922
Page
4
of
5
TL4412 Quick setup
guide
Tri Colour 3D Printer
How to change the colour settings
Once you have set up the printer and you
’re ready to set your colour
options, you can press the gradient button to bring up the colour menu:
In this menu you have a few
options:
Switch
will switch between
up to 4 colours; you can press
each colour and set the
value, and change the bottom
value to be the distance that
you want to change.
Gradient
will fade between
two colours over the distance
that you specify.
Once you have set your
desired parameters, press the
middle
“save” button to save
the parameters. The machine
will now print according to
these specifications until you
either
change
or
reset
the
machine.
The printer will lose colour
settings after each turn-off.
Examples:
To the left we have a model that has been set to
switch
with the colours:
(Magenta, Yellow, Green, Blue) at 5mm distance
To the right, we have a
gradient
with Yellow to
Magenta over a distance of 95mm.
