www.procontechnology.com.au
Phone: (03) 98306288
AC CURRENT MEASUREMENT
1) Insert the black test lead into the negative COM jack.
2) For current measurements up to 4000
µ
A AC, set the
function switch to the
µ
A position and insert the red
test lead banana plug into the
µ
A jack.
3) For current measurements up to 400mA, set the
function switch to the mA position and insert the red
test lead banana plug into the mA jack.
4) For current measurements up to 10A AC, set the
function switch to the 10A position and insert the red
test lead banana plug into the 10A jack.
5) Use the MODE button to select AC or DC Current.
"AC" must appear on the display.
6) Remove power from the circuit under test, then open
the point in the circuit where you wish to measure
current.
7) Touch the black test probe tip to the negative side of
the circuit. And touch the red test probe tip to the
positive side of the circuit.
8) Apply power to the circuit.
9) Read the AC current measurement on the display.
