- When the solar panel is installed near the camera, there is no need to use the connecting cable. Just
connect the battery pack to solar panel, and then plug the power output cable of battery pack to the
power input jack of the camera.
Night Vision
This camera has built-in IR LEDs, which provides the camera with the ability to view images in no/low
light conditions. Night vision will be automatically switched on in low illumination condition.
Motion detection
The camera is unique for motion detection feature with built-in PIR sensor. When motion is detected by
the PIR sensor, the camera will be activated. After working for
100 seconds, the camera will return back
to hibernation status if there is no motion detection after last activation. This feature is to save battery
power so that the battery can power the camera for longer time when full charged.
Charging the battery with power adapter (Not Included)
The battery pack can be also charged with a 9V DC 400mA power adapter, this is for the use in
continuous rainy or cloudy days.
To charge the battery pack, just disconnect it with both the camera and solar panel, and plug the power
adaptor cable into the charging jack of the battery pack.
3
