Note: If you detect with your more than one metal detector, please keep at least
5m apart.
3.Choose the discrimination modes
Press the Mode button, you can choose from the four discrimination modes,if
you are not interested in iron targets, you can choose to reject the iron,if the pull-tabs
off cans disturb your detection, you can choose to reject the pull-tabs. Please be
sure,not to reject the noble metal such as gold.
Generally, you can choose ALL METAL mode, which is used to detect all
metals, when you find a metal target, adjust the different discrimination mode to
determine the kind of the object. This would help you to determine whether it is worth
digging.
Note:
Once you’ve set the sensitivity and discrimination mode, if you don’t reset
the settings, it will not change until you turn the unit OFF,. Every time the detector
find the target object,the TARGET ID will show the target category, while the
DEPTH-SENS will show the approximate depth of the target object,and will flicker
for about 5 seconds, the LCD will come back to the state which you have set.
4.Motion detect
When detecting,slowly sweep the search coil, let the search coil parallel with and
about 1-5cm)above the surface. Never sweep the search coil as if it were a
pendulum.(Fig 10
、
11)
Fig. 10
Fig. 11
Most worthwhile metal objects will bring a repeatable tone, if the signal can’t be
repeated it is more than likely trash metals. When a clear sound is heard to show you
the buried target objects, you can get the approximate target type and depth on the
LCD screen,and you can also try sweeping the detected targets above the search coil
11
