Jaybird JB200, User Manual

Page: 9 / 82

4
Pairing the JayBird Bluetooth
®
Stereo Headset
with a Bluetooth
®
cell phone
The JayBird headset will work for calls on any Bluetooth® cell phone. If your cell phone supports the
Bluetooth
® A2DP protocol (stereo music), you can also use your headset to listen to stereo music.
1. Make sure that Bluetooth ® mode is enabled on your cell phone (refer to your cell
phone user manual).
2. With the headset in your hand, hold the power/talk button for 5 seconds until
you see steady blue blinking from the LED status indicator. Release the button.
The headset is now on.
3. Hold the power/talk button a second time for 4 seconds until you see a steady blue
and red blinking from the LED status indicator. Release the button.The headset
is now in pairing mode.
4. From your cell phone, perform a discovery/search (refer to your cell phone user
manual).
5. The cell phone will list all devices found within range. Select JayBird JB-200
Headset. Select OK or YES to pair your JayBird Bluetooth ® Stereo Headset with
your cell phone.
6. You will be asked for a passkey. Enter 0000
7. Once paired, the LED on the JayBird Bluetooth
®
Stereo Headset will blink blue
every 6 seconds.
8. To verify that your JayBird Bluetooth
®
Stereo Headset has established a handsfree
calling connection, dial a call using your cell phone. If the call completes correctly
(if you hear ringing on the JayBird Bluetooth
®
Stereo Headset), you have succeeded
in establishing a handsfree calling connection (Call audio in left side only).
9. To verify that your JayBird Bluetooth
®
Stereo Headset has established an A2DP
(streaming music) connection, play music on your cell phone. If you hear
stereo music on your JayBird Bluetooth
®
Stereo Headset, you have succeeded in
establishing an A2DP (streaming music) connection (Music audio in both sides).
E N G L I S H
Note: The pairing method described above is for most common Bluetooth ® enabled cell phones. Refer to your cell
phone user manual for detailed pairing instructions.