119166 Rev. A
2
E N G L I S H
I N T R O D U C T I O N
M A I N T E N A N C E & C L E A N I N G
Sunrise Medical recommends that a clinician such as a doctor
or therapist experienced in seating and positioning be con-
sulted to determine if a GO Back is appropriate. Backs
should only be installed by an authorized Sunrise Medical
supplier.
THE JAY GO BACK
The JAY GO Back is designed to provide the important benefits of
a proper back support for a wide variety of users. It is designed to
provide simple, comfortable and effective support to help maximize
function and increase sitting tolerance. In addition, it is light-weight,
durable and easy to use.
Maximum user weight:
300 lbs. (136 kg) for sizes 12" to 21" widths
500 lbs. (227 kg) for sizes 22" to 26" widths
WARNING
Installing a back support on a wheelchair may affect the
center of gravity of the wheelchair and may cause the
wheelchair to tip backwards potentially resulting in injury.
Always assess for the potential need for anti-tippers or
amputee axle adapter brackets to be added to the
wheelchair to help increase stability.
WARNING
Do not use JAY GO Back to push or lift wheelchair.
Improper use may cause the back to unexpectedly
detach from the wheelchair.
WARNING
Do not use the JAY GO back cover or straps to lift
wheelchair.
MAINTENANCE
Sunrise recommends that the JAY Go Strap Assembly be checked
for wear and tear every 6 months. Contact your authorized Sunrise
Medical supplier immediately to replace any broken components.
Do not continue to use the system after identifying loose or broken
components.
EASY CLEANING
NOTE–
When disassembling the back for cleaning, note the position and
orientation of the Strap Assembly and cover for correct reassembly.
Outer Cover
Wipe down outer cover using a soft cloth and warm soap and
water. The outer cover can be machine washed in warm water and
light detergent as needed.
NOTE–
Remove foam from inside of cover prior to machine
washing.
The foam core may be washed by hand with light soap and water.
Strap Assembly
Wipe down strap assembly as needed using light soap and warm
water.
ATTENTION
–
Do not machine wash the strap assembly.
If you have any additional questions regarding cleaning procedures,
please contact your authorized Sunrise Medical dealer.
GO BACK
Laundry Care Symbols
Machine wash in warm water
(50° C)
Only non-chlorine bleach,
when needed
Drip dry
Do not iron
Do not dry clean
Outer Cover
Strap Assembly
Foam Core
