EN/2009.V01
WK-6221S
EN
6
Switch Action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the
switch trigger actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Tool speed is increased by increasing pressure on the
switch trigger.
Release the switch trigger to stop.
Electric brake
This tool is equipped with an electric brake. If the tool consistently fails to quickly stop after switch
trigger release, have tool serviced at a JAY-tech service center.
Turning on the front lamp
CAUTION:
Do not look in the light or see the source of the light directly.
Pull the switch trigger to turn on the light. The lamp keeps on lighting while the switch trigger is being
pulled. The lamp turns off 10 -15 seconds after releasing the trigger.
NOTE:
Use a dry cloth to wipe the dirt off the lens of lamp.
Be careful not to scratch the lens of lamp, or it may lower the illumination.
1. Switch trigger
1. Lamp
