1. If you want to scan the films, please switch two switches on the top of the
device to the left side. Otherwise if you want to scan the photos, please
switch to the right side.
2. Put Slide/Negative onto the Slide/Negative Holder or insert photo into
appropriately sized photo tray (13x18, 10x15, 9x13).
3. Insert the Slide/Negative Holder into the slot on the right of the device or
insert photo tray into photo tray slot from the top of the device.
4. Apply the power to the Combo-Scanner by two ways:
(1) USB: Connect the Combo-Scanner to PC with USB cable
(2) 5V adapter: Connect the adapter to the device with USB cable
5. Press
POWER
button to turn on the Combo-Scanner.
Note:
(1) When the Film scanner mode is selected, the Film scan indication
LED is on.
(2) When the Photo scanner mode is selected, the Photo scan
indication LED is on.
6. Follow the menu on screen for scanning.
7. After finished the scanning, take out the memory card.
Note:
The Combo-Scanner has a 32MB built-in memory for recording,
when there is a memory card inserted, it will be the top priority for saving
data. (Available internal memory for image storage is approx 3MB)
8. Or read pictures from PC by USB mode.
8
7. General Operations
Quick Start
