28
Press UP/DOWN navigation buttons to select preferred program.
a) Press RED button on remote control and use number buttons to input the password if
“Lock Channel” is on. Then press RED button to add/remove a delete mark on
highlighted program. After that, press MENU button to enter a dialogue box. Select OK
to delete it; select Cancel to cancel this operation.
b) Press GREEN button on remote control and use number buttons to input the password if
“Lock Channel” is on. Then press GREEN button to lock/unlock a program.
c) Press YELLOW button on remote control to add/remove skip mark.
d) Press BLUE button on remote control to enter MOVE mode. Then use UP/DOWN
navigation buttons to select preferred position and press OK button to move it.
e) Press UP/DOWN navigation buttons to select preferred program. Then press OK button
to enter Rename menu page.
NOTE:
The factory default password is
“
0000
”.
Rename operations:
-
Press UP/DOWN/LEFT/RIGHT navigation buttons to select preferred option and press
OK button to input it.
-
Press RED button on remote control to add a space.
-
Press GREEN button on remote control to switch between capital letters and lower case
letters.
-
Press YELLOW button on remote control to delete an input.
-
Press BLUE button on remote control to save settings.
NOTE:
RENAME function is available only for analog programs.
