AAA-055-00187
12
Attach securely to the tractor using a retainer on the drawbar pin and a safety chain.
Stay out of the mixing chamber and away from the auger when engine is running. Keep others
away.
Stay away from overhead power lines when loading. Electrocution can occur without contact.
Clean reflectors, lights, SMV signs, before transporting.
Use hazard flashers on tractor when transporting. Follow all local laws and regulations when
transporting the machine on public roads and highways.
Before applying pressure to the hydraulic system, make sure all components are tight and that
hoses and couplings are in good condition.
Review safety instructions with all personnel annually.
Maintenance and Repair Safety
Follow ALL the operating, maintenance, and safety information in the manual.
Only properly trained personnel should maintain and repair this equipment.
Support the machine with blocks or safety stands when changing tires or working beneath.
Follow good shop practices:
Keep service areas clean and dry.
Be sure electrical outlets and tools are properly grounded.
Use adequate lighting for the job at hand.
Use only tools, lifting equipment, and safety stands of sufficient capacity for the job.
Place controls in neutral, stop engine, set park brake, remove ignition key, and wait for all
moving parts to stop before servicing, adjusting, repairing, or unplugging.
Relieve pressure from the hydraulic circuit before servicing or disconnecting from the tractor.
Make sure all guards are in place and properly secured when maintenance work is completed.
Before applying pressure to a hydraulic system, make sure all lines, fittings, and couplers are
tight and in good condition.
Keep hands, feet, hair, and clothing away from all moving and/or rotating parts.
Maintain fasteners in running gear systems at their specified torque at all times.
