AAA-055-00188
Jaylor Owner Manual
-20-
5000 Series Truck Mount Models
14.
BREAKING-IN
Although there are no operational restrictions for the machine when used for the first time, it is
recommended that the following items be checked prior to first use:
Before Starting:
Check oil level and that the tank outlet valves are fully open.
Ensure that the condition of the hydraulic oil is within the normal operation limits.
Cycle the unloading door and conveyor several times to fully charge the hydraulic system with oil.
Check for debris and/or any other items that could block or affect machine operation.
Check that no hoses are pinched, rubbing, or being crimped. Re-align as required.
Follow any break-in guidelines as recommended by the truck manufacturer.
After Operating for ½ hour:
Park mixer*
Check that all bolts and fasteners are all tightened properly as indicated in
Section 24.4
Check the auger. Remove all string, twine, or other entangled material.
Check that no hoses are pinched, rubbing, or being crimped. Re-align as required.
Check for oil leaks. Stop leaks before continuing.
Lubricate all grease fittings.
After operating for 5 hours and 10 hours:
Park mixer*
Re-torque all fasteners and hardware.
Check that auger turns freely.
Check the auger. Remove all string, twine, or other entangled material.
Proceed with normal servicing and maintenance schedule as defined in
Section 24
IMPORTANT:
Check the torque of clamping assemblies daily during the break-in period.
See
Section 24.14 for more information.
*IMPORTANT:
When parking the mixer, place on a flat, level surface, put controls in neutral, apply
parking brake, stop engine, remove ignition key, and wait for all moving parts to stop. Be sure to let
engine and hydraulic system cool to a safe temperature before servicing, adjusting or repairing any
of these components.
