AAA-055-00084
Jaylor Operator’s Manual
- 31 -
Twin Auger Trailer Units
Unloading Conveyor
The conveyor must be greased on a regular basis, as per the Maintenance Schedule. When
unloading the machine, engage the conveyor before opening the discharge door. The speed of
the conveyor can be adjusted to suit unloading requirements, by adjusting the flow control on the
tractor.
The conveyor has an adjustment to tighten or loosen the chain. There is an adjuster located on
both sides of the conveyor, at the end of the conveyor opposite to the hydraulic motor. Use
wrenches to tighten or loosen the tension on the conveyor chain. Refer to the
‘Maintenance and
Service Information’
for more details.
Figure 10 Chain Tensioning
