JAY
•
LOR
®
Operator’s Manual
- 23 -
Trailer Units - Models 2300/2350
CONTROLS
Weighing
The scale system on standard models includes
(3) weighbars. The axle system incorporates two
weighbars while the tongue and hitch system
incorporates the third weighbar. The weighbars
electronically measure the amount of ration inside
of the mixing chamber.
There are various scale indicators available for
use on your JAY
•
LOR
®
Cutter-Mixer-Feeder. The
mounting assembly for most Weigh-tronix
®
Scale
Indicators is the same. When attaching the
indicator to the machine, be sure that it is
securely fastened. Typically, the indicator slides
down into the mounting bracket, and it is also
necessary to use a wire or plastic fastener to
secure the indicator to the mounting bracket. For
more information on mounting, refer to the Weigh-
tronix
®
manual included in this binder.
Most scale options configured in trailer applications use a single scale indicator. The scale
indicator is located on the front side of the viewing platform on the front of the machine. The
mounting bracket assembly has (2) mounting locations on the viewing platform which allows
the scale indicator to be turned to face every direction.
Note: Once the desired position of the scale indicator is set, ensure that the mounting
bracket assembly nut is tightened firmly to secure the bracket to the viewing
platform.
Figure 6 - 3-point Scale System
(Tongue Bar and Axle Bars).
Figure 5 - Main Scale Indicator.
