8
Inside the battery chamber, there are 4 dip
numbers and each number has 2 positions
(UP and DOWN). When you set up the dip
switch on the receiver with the wireless
bite alarm, you are required to put the dip
switch on the bite alarm and the receiver to
the
same number in the same position (to match each other in
pairs). Please note your wireless bite alarms and receivers are
set in a default position (so when you switch on the power,
the wireless bite alarm will work with the receiver). If you
fish with other fishermen on the same water and are having
interference by the same frequency wireless bite alarms, you
should change the setup by changing the arrangement of the
dip switch of both the wireless bite alarms and the receiver.
-
Do not put into the water
-
Make sure you understand All instructions before using
-
Any repairs should be made by Professional. Do not
attempt to disassemble the bite alarm yourself
-
Clean the bite alarm with a slightly damp cloth. Do not
use soap or solvent
-If the bite alarm is not in use for some time, remove battery
WARNING
DIP SWITCH
