21
The weight on the kettlebell shell is not
matched to the weight on the base.
• WARNING: Manually adjusting the
weight of the kettlebell shell may
cause serious injury or damage
to the device. It may also cause a
mismatch between the weight of
the kettlebell shell and the base,
causing the device to become
inoperable. In this event, follow all
safety precautions noted before
• IMPORTANT: Perform these actions
low to the ground and keep all body
parts out of the direct path of the
kettlebell weights.
• Weight mismatch can be corrected
by manually removing the weights in
the kettlebell shell and adjusting the
shaft to the correct position.
• Flip the kettlebell shell upside down
so you are viewing the underside of
the kettlebell shell.
• Locate the shaft in the center of the
kettlebell shell. Press the locking
pin and turn the shaft counter-
clockwise.
• IMPORTANT: Pressing the locking
pin will unlock any weights inside
the kettlebell shell, and may result
in serious injury if allowed to fall.
Slowly rotate the kettlebell shell
right side up, keeping one hand on
the weights inside to slowly lower
them out of the kettlebell shell and
onto the ground.
