22
General
information
Getting
Started
Operation
Starting to
Print Cards
Cleaning
Trouble
Shooting
Technical
Specifications
2 11 43 310 Rev. 1.2
CLEANING
3.
Remove the adhesive cleaning roller from cartridge
and discard.
4.
Install new cleaning roller into cartridge*.
To avoid contamination, always hold the
cleaning roller assembly by the ends.
5.
Carefully peel off wrapper from new
cleaning roller while in cartridge.
6.
Replace cartridge into printer. Make sure the arrow
on top of the assembly is facing toward the rear of
the printer. Hook assembly into slot on printer and
rotate down. Ensure the assembly locks in place.
DO NOT touch the roller surface that contacts
the cards.
7.
Close cover
* See Appendix C for replacement cleaning rollers.
Although the CLEAN PRINTER message is displayed
until maintenance has been performed, the printer
will continue to operate.
