7
www.javad.com
SIM C
ARD
I
NSTALLATION
I
NSTRUCTIONS
The SIM card provides communication for data transfer between two GSM-capable receivers. The SIM
card can be purchased at your local cellular phone supply store. Once installed, the card generally
remains installed.
The SIM card must support Circuit Switched Data to communicate directly between receivers. The SIM
card must have GPRS support to communicate with a GPS Network IP address.
Note:
Both the Base and Rover receivers must have a SIM card installed (supporting Circuit Switched Data) and
have subscriptions to the same service provider for proper communication.
Once the receiver is turned on, the receiver board will detect the SIM card and it will be ready to use as
needed.
TRIUMPH-VS Optional SIM Cards Installation
TRIUMPH-VS is equipped with two SIM card slots, to allow using two SIM cards and switching between
two different cell providers. The SIM card can be purchased at your local cellular phone supply store.
The SIM card must have GPRS support to provide an Internet connectivity in the field, where WiFi is not
available. The SIM card must support Circuit Switched Data to establish the direct communication
between GSM-capable receivers.
Note:
Before SIM card installing in TRIUMPH-VS, it is recommended to remove PIN code using your cell
phone.
1. Ensure the receiver is turned off.
