background image

10                                                                                                                                                                                                                                          

www.javad.com

8

8

9

9

Shield

shell

Drain Wire

shell

Shield

When two OEM receivers connected directly through CAN cable, their 

CAN ports should be terminated by 120 Ohm resistors on both ends. 

This may be achieved by jumpers at J126 for CAN A and J127 for CAN B 

ports on Evaluation Kit board.
Additionally, CAN ports messages identifiers should be configured in 

both OEM receivers, so each receiver will accept messages transmitted 

only by its partner.
Example: Two receivers connected together through their CAN A ports.
Receiver 1 settings:

%%set,dev/can/a/sid/in/first,0x710
%%set,dev/can/a/sid/out/first,0x700

Receiver 2 settings:

%%set,dev/can/a/sid/in/first,0x700
%%set,dev/can/a/sid/out/first,0x710

Appendix

Safety Warnings

•  Read these instructions.

•  Keep these instructions.

•  Heed all warnings.

•  Follow all instructions.

•  Clean only with a damp cloth.

•  Install in accordance with the manufacturer’s instructions.

•  Do not install near any heat sources such as radiators, heat regis-

ters, stoves, or other apparatus (including amplifiers) that produce 

heat.

•  Protect the power cord from being walked on or pinched partic-

ularly at plugs, convenience receptacles, and the point where they 

exit from the apparatus.

•  Only use attachments/accessories specified by the manufacturer.

•  Unplug this apparatus during lightning storms or when unused for 

long periods of time.

•  Refer all servicing to qualified service personnel. Servicing is re-

quired when the apparatus has been damaged in any way, such as 

power-supply cord or plug is damaged, liquid has been spilled or 

objects have fallen into the apparatus, or has been dropped.

•  Apparatus shall not be exposed to dripping or splashing and no 

objects filled with liquids, shall be placed on the apparatus.

General Warnings

This product should never be used:

•  Without the user thoroughly understanding operator’s manual.

•  After disabling safety systems or altering the product.

•  With unauthorized accessories.

•  Contrary to applicable laws, rules, and regulations.

Warning: 

THE EVALUATOION KIT SHOULD NEVER BE USED IN DANGEROUS ENVIRON-

MENTS.

Summary of Contents for TRE-G2 Series













Reviews: