Javad Prego, Operator'S Manual

Page: 41 / 152

www.javad.com Prego Operator’s Manual 2 - 5
C O N F I G U R A T I O N
Connecting the Prego and a Computer
2.
Start PCView on your computer. The PCView main screen displays
(Figure 2-1).
Figure 2-1. PCView Main Screen
3.
Click File->Connect (Figure 2-2).
Figure 2-2. Click File->Connect
4.
On the Connection Parameters dialog box, select the following parameters
and click Connect (Figure 2-3 on page 2-6):
• Set the Connection mode (Direct).
• Set the port for your computer (typically COM1) from the Port drop-down
list.