www.javad.com
MinPad User’s Manual
2
-
11
K E Y S A N D L E D S
RX LED
LED Indicator for JNS Tri-Band Receiver
The color of the RX LED indicates the status of the differential corrections
for the Tri-Band board.
Solid green + red flashes
Modem is receiving data.
Solid red
Modem is in transmitter mode.
Red flashes
A fault condition has been detected.
Check the condition of the radio
modem’s antenna to make sure it is not
damaged and connected properly and
securely. Also, make sure that there are
no conducting objects near the antenna
location.
Red f green flashes
Modem is in command mode.
LED Status
Explanation
The RX LED indicates the L-Band signal status
Flashes green
The satellite signal is being searched
Solid green
The satellite is locked.
Solid green + red flashes
The data is being received
The RX LED indicates the Beacon signal status
Flashes green
the Beacon station signal is being searched
Solid green
The Beacon station is locked
Solid green + red flashes
The data is being received
The RX LED indicates the UHF signal status
Solid green
The UHF is ready to receive a signal
Solid green + red flashes
The data is being received
LED Status
Explanation
