4-18
Maxor User’s Manual
www.javad.com
4
O P E R A T I O N
Loading New Firmware
Notice:
You must load all three files when loading new firmware.
These files must come from the same firmware package.
The Maxor uses FLoader, a Windows®-based utility, to load firmware onto the
receiver and power boards. You can download FLoader to your computer from
the JNS website. For more information, refer to the
FLoader User's Manual
,
also available on the JNS website.
1.
Download and install FLoader, if applicable.
2.
Download the new firmware package to your computer.
3.
Physically connect your receiver and computer using the RS232 cable.
4.
Activate FLoader (Figure 4-14).
Figure 4-14. Floader Main Screen
5.
On the
Connection
tab, select the COM port on your computer that connects
with your receiver and select its speed (usually 115200).
6.
Select the
Device
tab and set the Device Type as Receiver (Figure 4-15).
Figure 4-15. Set Device Type
7.
Click
Get from Device
Summary of Contents for Maxor
