Javad HPT435BT JL User Manual Download Page 3

www.javad.com

  

3

PREFACE

Thank you for purchasing this product. The materials available in this 

Manual (the “Manual”) have been prepared by JAVAD GNSS, Inc. (“JAVAD 

GNSS”) for owners of JAVAD GNSS products. It is designed to assist own-

ers with the use of HPT435BT JL and its use is subject to these terms and 

conditions (the “Terms and Conditions”).

Note: 

 Please read these Terms and Conditions carefully.

TERMS AND CONDITIONS

USE – JAVAD GNSS modems are designed to be used by a professional. 

The user is expected to have a good knowledge and understanding of 

the user and safety instructions before operating, inspecting or adjust-

ing.
COPYRIGHT – All information contained in this Manual is the intellectual 

property of, and copyrighted material of JAVAD GNSS. All rights are re-

served. You may not use, access, copy, store, display, create derivative 

works of, sell, modify, publish, distribute, or allow any third party access 

to, any graphics, content, information or data in this Manual without 

JAVAD GNSS’ express written consent and may only use such informa-

tion for the care and operation of your HPT435BT JL. The information 

and data in this Manual are a valuable asset of JAVAD GNSS and are de-

veloped by the expenditure of considerable work, time and money, and 

are the result of original selection, coordination and arrangement by 

JAVAD GNSS.
TRADEMARKS – HPT435BT JL™, TRIUMPH™, JAVAD GNSS® are trade-

marks or registered trademarks of JAVAD GNSS. Windows® is a registered 

trademark of Microsoft Corporation; Bluetooth®  word mark is owned by 

the Bluetooth SIG, Inc. Product and company names  mentioned herein 

may be trademarks of their respective owners.
DISCLAIMER OF WARRANTY – EXCEPT FOR ANY WARRANTIES IN THIS 

MANUAL OR A WARRANTY CARD ACCOMPANYING THE PRODUCT, THIS 

MANUAL AND THE HPT435BT JL MODEM ARE PROVIDED “AS-IS.” THERE 

ARE NO OTHER WARRANTIES. JAVAD GNSS DISCLAIMS ANY IMPLIED 

WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR 

USE OR PURPOSE. JAVAD GNSS AND ITS DISTRIBUTORS SHALL NOT 

BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS 

CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL 

DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE OR USE 

OF THIS MATERIAL OR THE HPT435BT JL MODEM. SUCH DISCLAIMED 

DAMAGES INCLUDE BUT ARE NOT LIMITED TO LOSS OF TIME, LOSS 

OR DESTRUCTION OF DATA, LOSS OF PROFIT, SAVINGS OR REVENUE, 

OR LOSS OF THE PRODUCT’S USE. IN ADDITION, JAVAD GNSS IS NOT 

RESPONSIBLE OR LIABLE FOR DAMAGES OR COSTS INCURRED IN 

CONNECTION WITH OBTAINING SUBSTITUTE PRODUCTS OR SOFTWARE, 

CLAIMS BY OTHERS, INCONVENIENCE, OR ANY    OTHER  COSTS. IN 

ANY EVENT, JAVAD GNSS SHALL HAVE NO LIABILITY FOR DAMAGES OR 

OTHERWISE TO YOU OR ANY OTHER PERSON OR ENTITY IN EXCESS OF 

THE PURCHASE PRICE FOR HPT435BT JL.
LICENSE AGREEMENT – Use of any computer programs or software sup-

plied by JAVAD GNSS or downloaded from a JAVAD GNSS website (the 

“Software”) in connection with HPT435BT JL constitutes acceptance of 

these Terms and Conditions in this Manual and an agreement to abide 

by these Terms and Conditions. The user is granted a personal, non-ex-

clusive, non-transferable license to use such Software under the terms 

stated herein and in any case only with a single HPT435BT JL or single 

computer. You may not assign or transfer the Software or this license 

without the express written consent of JAVAD GNSS. This license is ef-

fective until terminated. You may terminate the license at any time by 

destroying the Software and Manual. JAVAD GNSS may terminate the 

license if you fail to comply with any of the Terms or Conditions. You 

agree to destroy the Software and manual upon termination of your use 

of HPT435BT JL. All ownership, copyright and other intellectual proper-

ty rights in and to the Software belong to JAVAD GNSS. If these license 

terms are not acceptable, return any unused software and manual.
CONFIDENTIALITY – This Manual, its contents and the Software (col-

lectively, the “Confidential Information”) are the confidential and pro-

prietary information of JAVAD GNSS. You agree to treat JAVAD GNSS’ 

Summary of Contents for HPT435BT JL




















Reviews: