Configuration
Configuring HPT204BT
Connecting through Bluetooth®
18
www.javad.com
2.4.3. Connecting through Bluetooth
®
Note:
Do not forget to attach the Bluetooth
®
antenna to Bluetooth antenna connector on the back panel of the
modem.
The HPT204BT modem contains Bluetooth
®
wireless technology that allows synchronization between
the modem and any other external device that supports Bluetooth
®
wireless technology; for example, an
IPAQ, or a computer with USB-to-Bluetooth
®
adapter or PCMCA-to-Bluetooth
®
adapter installed, etc.
HPT204BT and external device connection procedure varies slightly depending on the type of external
device used. In general, the connection procedure is as follows:
Note:
Refer to your Bluetooth
®
-enabled external device documentation for more detailed connection
information.
1. Turn on a Bluetooth
®
-enabled external device and your receiver. The default external device
mode is Master; the modem’s Bluetooth
®
module mode is Slave.
2. Instruct the external device (Master) to search for the modem (Slave).
3. Once the Master device detects the modem, use the procedure described in the external device’s
documentation to connect it with the modem.
2.5. Configuring HPT204BT
1. Connect the computer and HPT204BT, as described in “Connecting HPT204BT and Computer”
2. Turn on the modem.
3. Start ModemVU.
4. Select the HPT204BT in the
Options
window, and click
OK
:
5. Select the COM port the HPT204BT modem is connected to. Click
Connect.
