Chapter 3
27
www.javad.com
C
OMMAND
L
INE
I
NTERFACE
The built-in user-friendly Command Line Interface (CLI) allows user to perform a full
configuration of the unit and read the statistics and alarm status. It is the most powerful tool to
configure the unit. It makes changes to all possible settings that system will not be able to
determine automatically.
The CLI commands allow user to configure and reconfigure the unit’s settings. The user
configuration parameters that could be changed through the CLI are:
• Data Port Settings
- Baud Rate
- Data Bits (8, 7)
- Parity (Odd, Even, None)
- Flow control (None or RTS/CTS)
• Alarm Settings
• Radio Operation Modes
• Sleep modes
- On/Off
- Activate by internal real-time clock
- Activate through RTS/CTS lines
- Activate by external sense lines
- Activate by any combination of the parameters mentioned before
Note:
The unit’s configuration that is set or modified through the CLI will be lost after unit’s reboot,
unless the saving operation is used to store a new setting in the unit’s configuration file.
The CLI commands also provide filing operations, which include:
• Downloading
- Unit’s Configuration files
- Software Images
• Uploading Unit’s Configuration files
• Saving into the configuration files the configuration parameters modified through the CLI.
