Java wsd18-060, Operating Instructions Manual

Page: 8 / 26

5
LEVEL 1 water hardness degree 1
LEVEL 2 water hardness degree 2
LEVEL 3 water hardness degree 3
LEVEL 4 water hardness degree 4
¾
When the Coffee Machine leaves the factory it is
adjusted to LEVEL 3.
You can adjust another hardness. To do this, proceed as
follows:
⑴
DISPLAY: READY
⑵
Press the programming key (4), the program LED(23)
and illuminated ring (2) is active.
DISPLAY: FILTER ‐
⑶
Turn the Rotary Switch (1) until the following message is
displayed:
HARDNESS
⑷
Now press the Rotary Switch (1) to start the
programming.
DISPLAY: LEVEL 3
⑸
Turn the Rotary Switch (1) until the required level is
displayed.
For example, LEVEL 4
⑹
Press the Rotary Switch (1) to confirm the required level.
DISPLAY: HARDNESS
⑺
Press the programming key (4) to quit the
programming mode.
DISPLAY: READY
5. Installation of Claris plus filter cartridges
¾
If the Claris plus filter cartridge is installed properly,
de ‐ scaling of the coffee machine is no longer required.
5.1 Installing the filter
⑴
Fold up the cartridge holder. Install the filter cartridge in
the water tank, applying a gentle pressure (Fig. 1).
⑵
Fold down the cartridge holder again until it engages
audibly.
⑶
Fill the water tank with cold, fresh tap water and install
it again.
⑷
Press the programming key (4), the program LED(23)
and the illuminated ring (2) is active.
DISPLAY: FILTER ‐
⑸
Press the Rotary Switch (1) to start the programming.
DISPLAY: NO ‐
⑹
Turn the Rotary Switch (1) until the following message is
displayed:
DISPLAY: YES √
⑺
Press the Rotary Switch (1) to activate the filter
cartridge.
DISPLAY: INSERT
OPEN TAP
⑻
Put a sufficiently large container (approx. 1 litre) under
the replaceable hot water nozzle (16).
¾
If not installed already, insert the Claris plus filter.