Java wsd18-060, Operating Instructions Manual

Page: 19 / 26

16
DISPLAY: DISPLAY
⑻
Press the programming key (4) to quit the
programming mode or select the next programming
item using the Rotary Switch (1).
DISPLAY: READY
16. Maintenance
16.1 Filling in water
⑴
DISPLAY: FILL
WATER
¾
If this information is displayed, drawing off products is
no longer possible. Refill water as described in Chapter
2.3.
DISPLAY: READY
⑵
The water tank should be rinsed daily and refilled with
fresh water. Only fill in fresh, cold water. Never fill in
milk, mineral water or other liquids.
16.2 Emptying the coffee grounds container
⑴
DISPLAY: EMPTY
GROUNDS
¾
If this message appears on the display, you can no
longer draw off coffee. You must empty the coffee
grounds container first (Fig. 14).
⑵
Carefully take out the drip tray, it is filled with water.
DISPLAY: NO TRAY
⑶
Insert the empty and clean trip tray again.
DISPLAY: READY
—
The red water level indicator appears when the drip
tray is full.
16.3 Drip tray missing
⑴
DISPLAY: TRAY
MISSING
⑵
If this information is displayed, the drip tray (20) is not
installed properly or was not installed at all.
⑶
Insert the drip tray (20).
DISPLAY: READY
16.4 Fill coffee beans
⑴
DISPLAY: FILL
BEANS
⑵
Refill beans as described in Chapter 2.4.
¾
The message FILL BEANS will disappear after you draw
off your next cup of coffee.
‹
We recommend that you clean the bean tank regularly
before refilling beans, using a dry cloth. Before
cleaning the tank, switch off the coffee machine.
16.5 Replacing the filter
¾
After drawing off 50 litres, the filter cartridge will be
used up. A message requesting you to replace the