Java TH1500DB, Instruction Manual

Page: 8 / 16

8
320
TH1000
TH1000
About the Installation Location
Test Run
Checkup Table
1
2
3
Fix the machine in the locking sill. (At this time,
install the water receiver independently.)
After fixing the machine, fasten it with fixing
screws completely into the 2 holes in the bottom.
Connect the water receiver into the machine.
2. Fix the machine in the installation plate.
After connecting the power cable into the socket,
check if the machine operates normally.
If the machine doesn't operate, refer to page 12
of this manual.
If the problem maintains on the machine, please
contact the Repair & Service Center of our
company.
Floor
Wall
More than 10mm
Install the machine with the space of 320mm in height from
a floor which is the recommendation installation height.
Make sure to install the machine so the distance from the
wall is more than 10mm.
The wall where the machine is to be installed should be
flat without any layers.
Avoid the place for installation where people bump into the
machine easily and doors contacts it.
Do not turn the power switch on after inserting your hands.
After turning the power switch on, check if the beat sound comes out and the operating lamps
works correctly.
Check the power and voltage.
- Are you using a single-phase alternating current 230V?
- Are the operating lamps lighting up?
- Is the wing coming forth?
- Isn't there any vibrating strange sound?
Turn the power switch on.
Dry hands, inserting them.
3. Check if the machine works normally.
Procedure Checkups
Insertion-type Hi-speed Hand Dryer
6. Installation Method