manualshive.com logo in svg

Java TH1500DB, Instruction Manual

Share
Download
Java TH1500DB Instruction Manual Download Page 12

12

Symptoms

Checkups

Actions

In case that the 

wind doesn't 

come out even 

after you insert 

your hands

In case of 

making severe 

noise and 

strange sound

In case that the 

wind smells bad

In case that 

water is dripping 

to the floor

In case that 

the wind 

doesn't stop

In case that the 

self-diagnosis

 lamp is

flickering

If the problem remains even after the above actions are taken, contact the store that you 

purchased the machine or our repair & service center after turning off the power.

-Is there any power failure?
-Is the power cable unplugged?

-Is the power 230V?
-Are your hands sufficiently inserted?
-Is the operational indication original 
 ramp all coming to light?

-Isn't the wall where the machine is 
-installed weak or isn't the machine
 unstably installed?
-Is any stuff placed on the back side
 of the product or on the machine?
-Isn't the fixing board contacted 
 with the wall?

-Isn't the water receiver full with
 water?

-Is the water receiver properly 
 inserted?
-Is the water spilling over from the 
 water receiver?

-Isn't there any foreign substance 
 or pollutant on the sensor?

-Dose the filter lamp lighting up 
 green?
-Isn't the motor running with the 
 motor lamp lighting up red?
-Does the water level lamp light up 
 green?

-Empty the water receiver and clean it.

-Insert the water receiver properly.

-Remove the water from the water
 receiver.

-Turn the power off and clean the sensor 
 part and then turn the power on.

-To shift the filter where becomes the 
  filter shift time.
-There is a problem on the heater and 
 contact the repair & service center.
-Remove the water from the water 
 receiver.

-Install the machine on a solid and flat 
 wall.

-Remove the stuff.

-Fix the fixing board in the wall so it 
 wouldn't shake.

-Check the power state of other product.
-It makes the power plug paste in the cone 
  cent, to connect.
-Connect into 230V power supply.
-Insert your hands into the vent correctly.
-Turn the power off and clean the sensor 
 part and then turn the power on.

9. Trouble Shooting

Insertion-type Hi-speed Hand Dryer

Summary of Contents for TH1500DB

















Reviews:

No comments

Brands by name

Popular brands

Load more brands