21
8
11
7
5
4
1
2
8
6
3
9
Firstly, switch off the machine.
Then hold the rinse button
down for at least 3 sec.
The descaling symbol lights
up on the display.
The cleaning symbol lights up
on the display.
The filter symbol lights up on
the display.
Descaling symbol lights up
again (program loop).
To leave the program loop
press the on/off button.
The filter symbol will only
appear if the "water filter"
parameter has been set to "on".
This function can be used to
start descaling or cleaning
or to carry out a filter change at the
operator's discretion.
For descaling hold the
rinse button down for
more than 3 sec. and fol-
low the steps described on
page 17 from figure 5.
Press the rinse but-
ton briefly to start
the next function.
Press the rinse but-
ton only briefly to
start the next function.
In order to return
to descaling, press
the rinsing button only
briefly.
For cleaning hold the
rinse button down for
more than 3 sec. and fol-
low the steps described on
page 15 from figure 5.
For replacing the filter
hold the rinse button
down for more than 3 sec. and
follow the steps described on
page 19 from figure 5.
Cleaning, descaling and
filter replacement on
request
EN
Off
3 sec. min.
