Video-PX430 / PX520 / PX658 /
PX678 series
Hardware Installation
Installation Procedures
!! WARNING!!
Discharge static electricity by
touching the
GROUND
such
as metal part of your case
connected with good power
ground before you handle the
electronic circuit boards.
The manufacturer assumes no liability for any damage, caused directly or
indirectly, by improper installation of any components by unauthorized service
personnel. If you do not feel comfortable performing the installation, consult
with a qualified computer technician
.
Steps:
1.
Turn OFF all powers to your system, including any peripherals (printer,
external drives, modem, etc.).
2.
Disconnect the power cord and the monitor cable from the back of the
computer.
3.
Unfasten the cover mounting screws on your system and remove the system
cover. Refer to your system user manual for instructions to determine the
location of the mounting screws.
4.
Remove the retaining screw that holds the slot cover in place. Slide the slot
cover out and put the screw aside (you will need it to secure the adapter).
5.
To install the adapter in PCI-E expansion slot, carefully line up the gold-
fingered edge connector on the adapter directly above the expansion slot
connector on the motherboard. Then press the adapter into place,
completely. Use the (remaining) screw you removed to secure the adapter-
retaining bracket in place.
6.
Replace the computer cover. Secure the cover with the mounting screws you
removed in Step 3.
You have now completed the installation of your new graphics adapter on your system.
C o p y r i g h t © 2 0 1 1 J a t o n C o r p o r a t i o n , U S A
11
