Jaton NVIDIA GeForce PX8000, User Manual

Page: 24 / 42

Video-PX8000/PX558/558PCI series
C o p y r i g h t © 2 0 1 0 J a t o n C o r p o r a t i o n , U S A
24
Upgrade Steps:
Add or change your video adapter to an existing system, you
may precede a few steps before you install the new hardware
and software (video display driver). The followings are some of
the considerations:
1. To add a new adapter, ensure the mainboard has available
IRQ for new devices, and there is no conflict between each
other.
2. If you try adding this video adapter to an ALL-IN-ONE
mainboard (which video port built-in already), then you have
to disable that port first. Otherwise, that will be a problem for
the new video adapter setup.
3. The driver installation for system upgrade is the same as
below, if error occurs when you proceed to step 1, 2 or 3,
please consult with your system dealer or the existing
hardware manufacturer support.
* For Video-558PCI-Quad - one 6-pin power connector from
power supply must be connected to the video card power
connector to provide power to video card
* For Video-558PCI-QLP - one 4-pin power connector from
power supply must be connected to the video card power
connector to provide power to video card