15
6.
Replace the computer cover. Secure the cover with the mounting
screws you removed in Step 3.
You have now completed the installation of your new graphics adapter on your
system.
Upgrade Steps:
Add or change your video adapter to an existing system, you may
proceed a few steps before you install the new hardware and
software (video display driver). The followings are some of the
considers:
1. To change a new adapter, please remove the existing video
driver, or replace it to SVGA driver from Windows®98/Me
system before you remove the existing hardware.
2. To added a new adapter, ensure the mainboard that has
available IRQ for new devices, and there is no conflict
between the others.
3. If you try adding this video adapter to an ALL-IN-ONE
mainboard (which video port built-in already), then you have
to disable that port first. Otherwise, that will be a problem for
the new video adapter setup.
4. The driver installation for system upgrade as same as below,
if error occur when you proceed step 1,2 or 3, please consult
with your system dealer or the existing hardware
manufacturer support.
Software Installation
Software Installation
Software Installation
Software Installation
Windows
98 Driver Installation
Upgrade video adapter to an existing system. (Windows has
been pre-loaded)
1. Select [Next] to install Standard VGA Graphics Adapter at
Add New Hardware Wizard screen.
2. Check [Search for the best driver for your device] then select
[Next]