12
• Once all the data have been introduced in the memories, to get weighed and find out this
percentages, follow these steps.
• Press
”SET”
and next use the 3 and 4 pushers until your memory number appears on the
screen.
NOTE:
The scale always keeps the last results, and then you need to change the memory
if your memory is different to the last weighing. Push
“SET”
and the memory data will
flash on the display. Wait until
“0.0”
is showed on the display.
• Get on the scale and remain still. First your weigh will appear flashing on the screen.
Next it will appear
”0.. 0.. 0..0”
and next the percentages in this sequence: body fat, body
water, body muscle, body bone and suggested daily calories.
NOTE:
When the body fat percentage is showed on the display at the same time it will
appear also the following indications:
UNDERFAT, HEALTHY, OVERFAT, OBESE
This percentages and the weigh result will vary twice and next the scale switches off. The
adjoined tables will give an orientation of these percentages.
BEAR IN MIND THAT
ENVIRONMENT PROTECTION
GETTING WEIGHED AND OBTAINING BODY FAT, BODY WATER,
BODY MUSCLE, BODY BONE AND SUGGESTED DAILY CALORIES PERCENTAGE
• If
“O-Ld”
shows on the display it means the maximum weight of the scale has been
exceeded.
• You must proceed to change the batteries when the
“Lo”
symbol shows on the display. To
do that, open the lids placed in the back side of the appliance and change the battery.
• Dispose the appliance according to the local garbage regulations.
• Dispose the batteries according to the local garbage regulations.
• Never throw away the appliance or the batteries to the rubbish. So
you will help to the improvement of the environment.
• The batteries must not be mixed with other domestic residues.
ENGLISH
INSTRUCTIONS OF USE
JH-532 Manual.indd 12
10/10/18 11:33
