© 2021 Jason® Hydrotherapy • 501.771.4477
Page 10 of 28
Customer Service : 800.255.5766
FEATURES, CONTROLS AND OPERATING INSTRUCTIONS (cont.)
AirMasseur
®
Icon
The AIRMASSEUR icon is used to activate the
blower and the 20-minute timer.
•
CONSTANT Mode will start with the first press and
the icon will turn BLUE.
• WAVE Mode will start with the next press, indicat-
ed by a slow flash of the icon.
• PULSE Mode will start with the next press, indicat-
ed by a rapid flash of the icon.
• Pressing the icon again will shut the blower OFF
and the icon will turn WHITE.
• Once the system returns to Standby mode, the
icon will flash GREEN to indicate a purge count
-
down. After twenty (20) minutes the blower will
turn on for two (2) minutes to allow the air channel
to dry. This will be indicated by the AIRMASSEUR
icon turning solid GREEN. This purge cycle can
be canceled by pressing and holding the power
button for five (5) seconds.
• Starting the AirMasseur will turn OFF any other
therapy equipment running at that time.
MicroSilk
®
Icon
The MICROSILK
®
icon is used to activate the
MicroSilk
®
unit and the 20-minute timer.
• Once pressed, the microbubble generator will start
and the icon will turn BLUE.
• Pressing the icon again will shut the unit OFF and
the icon will turn WHITE.
• Starting the MicroSilk unit will turn OFF any other
therapy equipment running at that time.
Blower Speed Icon
The SPEED icon is used to increase or
decrease the blower speed once the blower
is ON.
• Press and hold the icon to decrease the blower
speed until the desired intensity is reached, then
release.
• Press and hold the icon again to increase
the blower speed until the desired intensity is
reached.
•
The POWER icon will flash red once the high or
low speed limit has been reached.
• The blower will return to the highest speed on any
mode change.
