Jason International, Inc. •
501.771.4477
Page 6 of 8
Customer Service : 800.255.5766
user MaInTenanCe InsTruCTIOns
huMIDITY
Warning: avoid high humidity levels in your home. mold, mildew,
fungi, and bacteria which may be harmful to health thrive in areas with
continued high humidity levels; therefore, every precaution should
be taken to make sure your plumbing fixtures including bathtubs,
therapy baths, or showers do not become a source of high humidity
due to improper installations or leaks.
To avoid having your plumbing fixtures become a source of
unwanted humidity, please make sure the following steps
are taken prior to installation.
1. Make sure the area where the bathtub or shower is
installed is well vented and allows enough ventilation and
air circulation to dry the bathroom environment within a
short time after taking a bath or shower.
2. If your bath or shower unit is tiled-in, use units with an
integral tile flange or make sure a tile flange kit or a similar
mechanical barrier is installed to prevent shower spray,
splash, or overflow to leak behind the bathtub.
3. Make sure the plumber properly tests the AirMasseur
®
bath
before it is roughed in to make sure there are no leaks and
it is installed with proper access to bath equipment.
4. Make sure that all of the plumbing and fixtures in the
bathroom are in good working order and have no leaks.
5. Do not use carpeting or other materials or furniture, which
can hold moisture, in your bathroom.
6. Use disinfectant to clean any bathroom surfaces, which
are regularly exposed to moisture.
7. Clean and disinfect humidifier and dehumidifiers as
recommended by the manufacturer. Replace the air filter
on the HVAC unit once a month.
8. Clean moldy surfaces as soon as any mold appears by
using a detergent/soapy solution and appropriate household
cleaner. Always use gloves during cleaning. Dispose of
any sponges or rags used to clean mold.
CleanInG
With minimum care, this acrylic-surfaced bath will retain its
high-luster finish for many years. For regular cleaning use
Jason Bath Cleaner or a mild NONABRASIVE
liquid detergent
solution (i.e. glass cleaner) and a soft, wet cloth or sponge.
Do not run the air system with foaming cleaners or soaps.
Rinse the bath thoroughly after cleaning.
aIr heaTer anD aIr TeMPeraTure
The air heater incorporated into the air blower is designed
to preheat the incoming air to body temperature, not to heat
the bath water. The air heater automatically turns on when
the air blower is activated.
Even through all Jason Integrity
TM
AirMasseur
®
baths provide
preheated air, occasionally some people with sensitive skin
might experience a cold air sensation. This sensation is caused
by the swiftly moving heated air bubbles blowing on the wet
skin. This phenomenon can be related to the use of a fan for
cooling on a hot day. While the ambient temperature does
not change, the moving air makes you feel cooler. Avoiding
this cold air sensation is among the reasons Jason avoids
placing air jets directly beneath the body. If you experience
a cool air sensation, which is most noticeable during the first
few minutes of an air bath, simply move your body slightly
away from the closest air jets.
FlushInG / sanITIZInG
Upon start-up and not to exceed 90 days thereafter, flush the
airmasseur
®
bath and plumbing system with
Jason’s Bath System
Cleaner, available at Jason Dealers, or use an equivalent
cleaner. Follow the cleaning instructions below:
1. Close the bath drain.
2. Fill the bath with warm water to a level at least ten inches
below the bath deck.
3. Pour 16 ounces of Jason’s Bath System Cleaner into the
bath water.
4. Turn on the blower for 10 minutes.
5. Turn off the blower and drain the bath.
6. To rinse, refill the bath with cold water, turn on the blower
for five minutes, then turn off the blower and drain the
bath.
Note:
The bath can be sanitized after each bather without
harming the AirMasseur
®
bath plumbing.
aCrYlIC surFaCe MaInTenanCe
Areas with minor scratches or dull surfaces can be
restored by applying commercially available plastic polish
(i.e. Novus Plastic Polish No. 2, available at your Jason
dealer), followed by an application of acrylic paste wax. Buff
the surface with a clean soft cloth.
CautION: Do not use sandpaper, steelwool, or abrasive rubbing
compounds.
If scratches are too deep to rub out, or if the damage
penetrates the acrylic surface, consult the dealer for
recommendations on surface repair.
PluMBInG Or eleCTrICal rePaIr
Refer all plumbing or electrical repair to a qualified service
technician.
DO NOt attEmPt tO RESOlVE thE PROblEm.
Attempts to repair plumbing or electrical equipment by a non-
qualified service technician can result in danger of electrical
shock or damage to the unit and will
VOID thE WaRRaNtY.
When contacting the dealer or service representative, always
have the serial number, proof of purchase, and model number
available. This will insure a quick response on warranty
items. The serial number can be found on the front page of
this manual or on the small card adhered to the back of the
bath just above the blower.
all WaRRaNtY REPaIRS muSt bE
authORIzED bY thE maNufaCtuRER bEfORE WORK IS StaRtED.
