Jasmine JS-TA214J, User Manual

Page: 8 / 13

- 8 -
Install a cartridge
JS-TA214J tonearm is specially equipped with a protractor to set the
cartridge. As shown as the figure below:
Step 1: first, put the protractor into the central pillar of the turntable,
and rotate the protractor until the line "pointing to the arm
pivot" is aligned with the arm pivot center.
Step 2: install the cartridge and connect the four cartridge cords
according to the corresponding color. Red and green are the
right channel, white and blue are the left. Then install the
cartridge on the headshell of the tonearm. Before adjusting the
azimuth angle of the cartridge, be sure to set the tracking force
to about 1.5g, so as to prevent the stylus from being damaged
due to excessive pressure.
Step 3: move the cartridge back and forth until the tip of the stylus
moves precisely along the "stylus Path" from the outside to the
inside.
Step 4: adjust the horizontal and vertical azimuth angles of the
cartridge so that the bottom edge of the cartridge is parallel to