Page 46
(1) Wireless Remote
Wireless pairing connection
The optional wireless remote control devices for this series of models include wireless foot
pedal controller and wireless handheld remote controller. After entering
"User Parameter
Setting", set the remote control function to "Wireless Remote" and return to "User Parameter
Setting"; rotate the master encoder to select "Open Wireless Remote Match"; press the
master encoder to pair the welder with the wireless remote controller. During pairing, the blue
indicator of the wireless module on the front panel will flash; after successful pairing, the blue
indicator will remain on, the LCD screen will exit the pairing page, and the symbol
will
change to
on the top right of the page.
Note: If the pairing is not successful after a long time, the user can press the master encoder
to realize "Match Close", and the LCD screen will exit the pairing page. If the connection is
disconnected during use, the symbol
will change to
on the top right of the LCD
screen.
The pairing page is shown below.